GE PME7.0 To Citec Communication

C

Thread Starter

Chris_IWO

Hi ALL,

What is the name of the Schneider CitecSCADA 7.1 driver that talks directly to GE PAC Rx3i using Proficy Machine Edition version 7.0
 
Your version of Proficy ME is irrelevant for the communications between your SCADA and the RX3i and is not part of the communications loop there.

The RX3i has several protocols built into it depending on which port you will be using. The most likely is Ethernet and the GE-IP "SRTP" protocol, I do not know what Citec calls it. Another standard is Modbus TCP/IP but using it you will need to turn it on in the CPU and likely need to do some extra steps in logic to get the information wanted into the needed Modbus address locations.
 
Top