Read and participate in active technical discussions with automation and industrial controls users from all over the world.
Control.com - Nerds in Control
Member Login
Modbus Links
Search
Jump to a Date
Cool stuff
RSS Feed
Use this link to get an RSS feed of the Modbus Community article flow, for private, non-commercial use only:modbus.control.com/rss/
To get a personalized feed, become a member at no cost.
How to put to master in the same Modbus bus RS485
New Replies:
By Jerry Miille on 25 September, 2009 - 4:39 pm -
The MARC Multii-Port:
http://www.miille.com/din366-10p.pdf
is commonly used for connecting...
Does anyone know of multiple vendors of USB modbus plus devices?
New Replies:
By JoeS on 25 September, 2009 - 2:39 pm -
USB is not suitable for SCADA communications. There is a reason why there is so little support for...
This module works fine. Only issue is to use the same USB port all the time. The driver only...
Question for anyone that uses Kepware OPC with a serial server.
New Replies:
I will say that Modbus Test Pro will work just fine unregistered. The only thing it will do is...
By Fred Loveless on 24 September, 2009 - 9:36 am -
If you set the B&B converter to be a Modbus TCP to Modbus Serial converter then you can us the...
By Bill Graham on 24 September, 2009 - 3:40 am -
Hi Jay,
I am not familiar with the B&B terminal server but the packets used for TCP modbus...
By Mark on 24 September, 2009 - 12:30 am -
Hi,
I tested the Modbus TestPro with the PeakHMI MODBUS TCP simulator and one other simulator.
...
With MODBUS, there are in general two ways to communicate via TCP/IP. The first (which Kepware...
Grass root project looking a cheap way of bringing groups of temperature signals that are in close proximity into a DCS
New Replies:
I tend to agree with David, I suspect that you are dealing only with temperature elements, please...
By David on 18 September, 2009 - 8:29 pm -
> groups of temperature signals <
I would think that you mean thermocouple direct because...
I need to control a FC51 Danfoss VFD with LS PLC.
I need to start , stop & jog the drives.
I need to start , stop & jog the drives.
New Replies:
Dear Mr.Bruce
Thank you for your help Finally we got it working
...
The answer to your questions will take a bit more space than available on this forum. I recommend...
By Derik on 14 September, 2009 - 1:32 pm -
I , an application engineer from LS Automation & Danfoss Engineer, tried to establish the...
Dear Mr. Bruce,
Thank you very much. I will try these setting once I am back in office tomorrow...
I am trying to integrate a Modbus RTU device (Emerson ROC809) into a HART communications network (digital HART FSK over 4-20mA loop) with a Siemens S7-400 with PDM.
New Replies:
By Dan W on 18 September, 2009 - 8:15 pm -
> I understand that PDM needs EDD files so that is not the issue. <
I suspect it is an...
Is there a Modbus to BACnet data converter that allows the two protocols to communicate?
New Replies:
By Yogesh Deshmukh on 18 September, 2009 - 10:47 am -
Aftek's Modbus to BACnet converter (APC-BM series) is used to integrate HVAC systems (VAV boxes,...
communicating with ACM12 via MOdbus protocol to Proface touchscreen
New Replies:
Hi all,
i also want to communicate to Yokogawa DCS (Centum CS R30)via the ACM12 card. My data...
How to a PLC map modbus coils and registers
New Replies:
By Schneider Italy on 16 September, 2009 - 2:41 pm -
go to google and search for PI-MBUS-300. You will find a very useful guide...
By M Griffin on 16 September, 2009 - 12:35 pm -
Discrete inputs are read-only bits. These are typically inputs. Read them with function 2.
Coils...
Illegal response size error message on ABB PLC
New Replies:
By rudd on 16 September, 2009 - 11:13 am -
That Exception is sometimes called "Illegal Response Length" and sometimes "Slave...
By Patrick Lansdorf on 15 September, 2009 - 7:32 am -
Hi there,
Are you sure that the exception, 04, is Illegal Response Length. The modbus spec. says...
communications protocol for modbus ASCII.
New Replies:
By M Griffin on 16 September, 2009 - 8:48 am -
"http://www.modbus.org/tech.php" The link to the download area is at the top of the page....
Hi, I assume that you are writing the software in a PLC, only ask as most PLC's have modbus...
Hi Lewis,
www.modbus.org have all the info. I have in front of me 'Modbus over Serial Line...
How to communicate with PLC
New Replies:
You can use modbus activex professional.
http://www.fultek.com.tr/ModbusEn.html...
Trouble establishing communications between a Quantuam 311 CPU programmed in Unity and Wonderware InTouch 9.5 and SA85 I/O Server ver 8.1
New Replies:
Set the serial port parameters for the M340 cpu by "double clicking" on the serial port....
Can I use MVI56E without MVI56-XT?
New Replies:
Hello,
The MVI56E-XT is designed for the Logix-XT control platform, allowing it to operate in...
Any information on RS485booster,
New Replies:
By Carl Ellis on 12 September, 2009 - 10:27 am -
Is the wire/cable already in place? If not, consider wireless.
Almost all countries allow some...
By Ashraf on 11 September, 2009 - 7:47 pm -
YOU MAY:
-------
1) Check the documentation of your RS485 Transmitter.
Some RS-485...
By Harvard on 10 September, 2009 - 11:21 am -
If you are not in need of multidrops I would use a Black Box ME794 Micro Driver which is good for...
baud rate significance in data transmission speed using modbus
New Replies:
By M Griffin on 11 September, 2009 - 6:58 pm -
If you increase the baud rate, the data transmission rate will increase. However, every device on...
Question about how to develop a software which is communicating on modbus/TCP
New Replies:
By M Griffin on 11 September, 2009 - 5:27 pm -
In reply to JonC:
I read your blog post, and it sounded interesting. How did you do the remote...
By JonC on 11 September, 2009 - 11:55 am -
Hey all,
Don't know if anyone is still working on this. I have written a great deal of code...
Looking for a device that does serial/ethernet and modbus/tcp
New Replies:
By M Griffin on 10 September, 2009 - 10:07 pm -
I haven't bought one of these myself, but it seems to meet your criteria:
...
By Paul Wacker on 10 September, 2009 - 9:17 pm -
David,
If you already have a terminal server (aka device server) installed, and the Meterbus...
Implemention of MODBUS application protocol specification
New Replies:
By M Griffin on 9 September, 2009 - 12:50 pm -
Your question is a bit ambiguous so I may not have interpreted your question correctly. However,...
Your use of this site is subject to the terms and conditions set forth under Legal Notices and the Privacy Policy. Please read those terms and conditions carefully. Subject to the rights expressly reserved to others under Legal Notices, the content of this site and the compilation thereof is © 1999-2009 Nerds in Control, LLC. All rights reserved.