Read and participate in active technical discussions with automation and industrial controls users from all over the world.
Control.com - Nerds in Control
Member Login
Modbus Links
Search
Jump to a Date
Cool stuff
RSS Feed
Use this link to get an RSS feed of the Modbus Community article flow, for private, non-commercial use only:modbus.control.com/rss/
To get a personalized feed, become a member at no cost.
Modbus TCPIP master to many slaves
New Replies:
By Miroslav on 4 November, 2009 - 5:21 pm -
Hi,
thanks for your comments. You clarified what I was thinking. I will implement 1x socked per...
Miroslav,
If your slaves (servers) support Modbus/UDP, then you could use Modbus/UDP as an...
By M Griffin on 30 October, 2009 - 4:33 pm -
This has been answered a couple of times already, but I would like to clarify a point. Normally,...
By Darrin Hansen on 30 October, 2009 - 9:20 am -
Functionally, either will work. It's more an issue of performance, which may or may not be a...
How to implement Modbus addressing for a graphics monitor that does not have the GE protocols in their driver set.
Any of you know how to minimize delay time in MODBUS RTU over RS-485 2-wire
New Replies:
By Harvard on 3 November, 2009 - 5:12 pm -
As the saying goes, "fix all the things you know are wrong and all the weird stuff just...
By asaria on 3 November, 2009 - 7:36 am -
All,
Thanks for your support. I had solved the problem today. The problem is, in field they...
By asaria on 28 October, 2009 - 11:48 am -
I had checked it. From panel, I tried to read data from slave using Modbus simulator, i got only 2s...
By asaria on 26 October, 2009 - 10:24 am -
What do you mean by KeyUp and KeyDown timing?...
I'd check to see if the slave has a "response delay", or similar setting.
Also, since...
It is possible to get reply from logo in seconds if you can change/access modbus communication...
By Harvard on 25 October, 2009 - 11:32 pm -
Seems you probably have a KeyUp/KeyDown timing issue. The most common problem is the slave responds...
Modbus Fire & Security Alarm System
New Replies:
> I need vendors for Fire Alarm and Security Alarm Panels that can communicate using...
Modbus RTU master for versamax PLC
New Replies:
Yes, you can communicate SRTP, the programming protocol, through the VersaMax IC200CPU001 Port 1. ...
Connecting Data Flow Systems Hyperserver to a GE 9030 OLC using standard Modbus addressing.
I have some problems on the TCI.
it stops when the operating system of the HMI start.
it stops when the operating system of the HMI start.
I'd like to pull data from the Telemecanique Zelio Logic Relay.
Any one have any idea about Toshiba IFMB640TLE...
method of connecting a DCS system to GE Mk6 using Modbus serial...
New Replies:
By Rshivabalan on 25 October, 2009 - 6:38 am -
The one of the ways to connect the MKVI HMI with the Foxboro DCS is by the GEGSM protocol. We are...
Question about connection between two control units
New Replies:
Roy, that was my question, too.
Regarding the protocol used by the DCS, 'Ethernet' just isn't...
By Roy Matson on 23 October, 2009 - 12:55 pm -
Pham,
You do have a problem. In my experience most DCS systems have a Modbus communication...
By Wassim Daoud on 23 October, 2009 - 11:37 am -
This is a common challenge in automation world. The more often chosen solution recommended for it...
Connect an Modbus Slave Simulator to Scada
New Replies:
Nishith,
Simply Modbus offers a Modbus Slave Simulator.
Here is a link to their website:
...
By Lorne on 21 October, 2009 - 10:20 am -
Calta produces a Modbus simulator package. A demo is available at www.calta.com....
By Mark on 21 October, 2009 - 8:42 am -
Hello,
Check out the free slave simulators at: http://www.peakhmi.com/
Good luck,
Mark...
how to multiplex RS485 slaves over single RS232 channel
New Replies:
By Darrin Hansen on 20 October, 2009 - 9:06 am -
Hi Sven.
There are of course many gateways out there that could accomplish your task. Our...
Hi Patrick,
Thanks for the reply. Your product too does what we needed, but as I just said in...
Hi Jerry. Your product does exactly what we needed, but we've now decided to make connection via...
By Jerry Miille on 16 October, 2009 - 4:37 pm -
We have two products that can be used for this application. The Omnii-Comm:
...
By Patrick Lansdorf on 16 October, 2009 - 3:10 am -
Hi,
I think that there are a number of options that you have to choose from. I would use a...
By Vance Newman on 16 October, 2009 - 12:02 am -
What exactly are you trying to do.. For example.. Connect 3 slave (Remote) through modem to PC...
NTP/Modbus interface for time-stamping
New Replies:
There is no practical limit to the number or protocols that can be sent via a single Ethernet port....
By gc05 on 19 October, 2009 - 5:06 am -
The main protocol for the Scada system is modbus and the clock sync is NTP. However, we are trying...
gc05,
NTP, as far as I know, is a network protocol for time-synchronization --- in other words,...
Water/Gas Meter with Modbus/LonTalk/BACnet Compatibility
New Replies:
Hello Steve,
For your application, I recommend using a Sensus (or Sensus-compatible) water meter...
how a flow meter communicate
New Replies:
For your application, I recommend using a Sensus water meter and a Sensus gas meter, both of which...
Can MicroLogic PLC read Modbus Holding Registers in the 5xxxx range?
New Replies:
By M Griffin on 17 October, 2009 - 1:43 pm -
Thanks to Mark for the correction. It appears that old versions of the Modbus spec did make some...
By Mark on 17 October, 2009 - 2:25 am -
Hello,
What Mr. Griffin said is 99.99999% accurate.
The current specification: MODBUS...
The typical Modbus Address Scheme is :
0x = Digital Outputs (Bit)(Read / Write)
1x = Digital...
Is it possible to use any RS232 to TCP converter or should I use a specific converter for Modbus?
New Replies:
By Paul Wacker on 15 October, 2009 - 3:56 pm -
Francisco -
Modbus TCP is not the same Modbus RTU encapsulated in a TCP/IP packet. So, instead...
Your use of this site is subject to the terms and conditions set forth under Legal Notices and the Privacy Policy. Please read those terms and conditions carefully. Subject to the rights expressly reserved to others under Legal Notices, the content of this site and the compilation thereof is © 1999-2009 Nerds in Control, LLC. All rights reserved.