How to transfer the program file of Modicon TSX PLC from computer to PLC? What is the command for this?

 

You need the programming software for that PLC in order to upload that file into the PLC. I am guessing you talking about the Compact PLC, for which you will need Proworx or Concept in order to talk to the PLC.

 

You would be requiring dedicated Software related to your PLC Model, e.g., For XEO/Micro/Premium use Proworx7.0 by Schneider Electric. For Quantum use Concept up to 512 model, & above 512 series use UNITY.

Furthermore, you have to stop your controller for uploading the program.

 

Actully we are using PLC Pro 7 software, and also PIC 3 software... but what's the addressing for sending it to terminal port?

 

Bad assumption. TSX is a prefix on almost every PLC product released by Modicon or Telemecanique in the last 15 years.

TSX Compact, Momentum, Quantum use Concept or ProWORX depending on the programming language used (984 or IEC)

TSX17 used PL7-2 (DOS software)

TSX27,47,67,87,107 used an OS/2 based software called XTEL or PL7 depending on which manual you're referring to.

TSX37 (Micro) and TSX57 (Premium) used PL7 Pro (Windows software).

And of course if it's a newer Quantum or Premium, it may have been programmed with Unity.

 

If the PLC is a TSXP37 or 57 you will need PL7
software. If it's a Nano PL707 software.

TSX is just a Generic name, the series is the
identifier.

The cable would be a TSXPCX1031.

Nick

 

You would need the programming tool to do that... Schneider Electric's programming tools are varied and confusing to say the least. Let's see now; For TSX Compact that would be ProWorx (ProWorx replaced Modsoft. Modsoft has been taken off the catalogue). For TSX Quantum that could be ProWorx, Concept or Unity! For TSX Nano that would be PL7-07. For TSX Micro that would be PL7 Micro/Junior/Pro. For TSX Premium that could be PL7 Junior/Pro or Unity! Then of course there is the Twido which requires Twidosoft and there is the Zelio has the Zeliosoft. Mind boggling, huh??

So really, tell us which model of TSX PLC are you refering to?

 

If you`ve installed programming tool, connect to Modbus Plus network and select addressed terminal, open program (configuration) and download to PLC.

good luck..
rammy

 

Whats happening here, is it uploading or downloading?? the fella wants to transfer to PLC so guess its downloading then.

rammy

 

Try checking out FasTrak Softworks Modicon Workshop software. The website has a good explanation of the features.

 

We had used Modsoft to program our AEG Modicon Micro 110 CPU 51201. Do you know of any software that is compatible? We want to download what was programed into (2) existing PLCs - so if one were to go bad we could merely upload the info into a new PLC. My e-mail address is mdswan @ hollandterminal. com

Thanks.

 

Talking about Modicon, does anyone know how to connect Modicon to Asset management Software? We would like to get data up modicon to AMS and appreciate any solution you can offer.