Today is...
Wednesday, July 18, 2018
Welcome to the Modbus Community, about
the world's leading automation protocol.
Atlas Copco Elektronikon Mk5 Communication
Looking for communications options to an Atlas Copco Elektronikon controller

Do anyone have experience interfacing to an Atlas Copco Elektronikon Graphic (Mk5) controller. It seems to have an Ethernet port and I want to interface to an InTouch SCADA. Would be great if it can to TCP Modbus.

thanks in advance...
Phil

By Ikhtiander - on 30 May, 2018 - 12:26 pm
1 out of 1 members thought this post was helpful...

Hi Phil,

Atlas Copco Elektronikon MKV will need Combox E Gateway:

https://www.scribd.com/document/261220289/9820-3582-05-User-Guide-MKIV-Ethernet-IP-03

This Gateway should be loaded with Modbus TCP supported firmware and activated by Atlas Copco before you can use.

Hope this helps you,
Ikhtiander