Today is...
Tuesday, October 16, 2018
Welcome to the Modbus Community, about
the world's leading automation protocol.
Experion Modbus TCP/IP Scaling
Looking for a way to scale Modbus holding/input registers using the PCDI numeric array blocks.

I'm using PCDI blocks to communicate with several PLCs over Modbus TCP/IP. I am looking for the best way to scale holding/input registers. The numeric array blocks have range scaling, but it doesn't do what I expect. In my experience, you'll get a raw value that needs to be multiplied by some factor to get your EGU value. I could add a multiply block on the PV outlet, but would rather do it all in the PCDINUMARRCH block.

Please advise.