Today is...
Wednesday, June 26, 2019
Welcome to the Modbus Community, about
the world's leading automation protocol.
Bulk Modbus Points Display
Displaying 25K Modbus points on a computer without PLC.

In a factory, 45 different panels will give information about 25000 points located in various scattered locations. All points will be brought to a central location via the plant's existing LAN network. I need to display these points on a computer monitoring the entire network. Only display is required not control. The operator will only see the info on the screen but will not give any command to the sources. The display of the Modbus data can be in tabular form.

Please suggest a software which can accept Modbus over TCP/IP from various 45 different IP address for 25000 points and process and display it in a comprehensible manner.

Thanks.

Hello,

PeakHMI might be a good fit.

Good luck,

Mark
https://www.hmisys.com.